panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ jt-v asctb188e 201202-t ordering information types 1. 1 form a dust cover type standard packing: pcb type: carton: 50 pcs.; case: 500 pcs. tmp type: carton: 50 pcs.; case: 300 pcs. 2. 1 form c dust cover type standard packing: pcb type: carton: 50 pcs.; case: 500 pcs. tmp type: carton: 50 pcs.; case: 300 pcs. surge withstand voltage: 6kv 1a/1c 30a power relays jt-v relays nominal coil voltage part no. pcb type tmp type 12v dc jtv1ag-pa-12v jtv1ag-tmp-12v 18v dc jtv1ag-pa-18v jtv1ag-tmp-18v 24v dc jtv1ag-pa-24v jtv1ag-tmp-24v 48v dc jtv1ag-pa-48v jtv1ag-tmp-48v nominal coil voltage part no. pcb type tmp type 12v dc jtv1g-pa-12v jtv1g-tmp-12v 18v dc jtv1g-pa-18v jtv1g-tmp-18v 24v dc jtv1g-pa-24v jtv1g-tmp-24v 48v dc jtv1g-pa-48v jtv1g-tmp-48v pcb type tmp type rohs compliant features ?surge withstand voltage: 6,000 v ?high switching capacity ?30 a for 1 form a ?2 contact arrangements ?1 form a or 1 form c ??mp types available ?ul/c-ul recognized ?class f types standard typical applications ?oven ?heating & ventilation ?home appliance contact arrangement 1a: 1: 1 form a 1 form c protective construction s: g: sealed type dust cover type jtv mounting classification tmp: pa: tmp type pcb type nominal coil voltage, dc 12v, 18v, 24v, 48v notes: 1. certified by ul/c-ul 2. 5 v, 6 v, 9 v dc types are also available. please contact us for details.
panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ jt-v asctb188e 201202-t 3. 1 form a sealed type standard packing: pcb type: carton: 50 pcs.; case: 500 pcs. tmp type: carton: 50 pcs.; case: 300 pcs. 4. 1 form c sealed type standard packing: pcb type: carton: 50 pcs.; case: 500 pcs. tmp type: carton: 50 pcs.; case: 300 pcs. rating 1. coil data 2. speci?ations * speci?ations will vary with foreign standards certi?ation ratings. notes: *1. this value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. wave is standard shock voltage of 1.2 50 s according to jec-212-1981 *3. in order to obtain the full rated life cycles, the relay should be properly vented by removing the vent nib. more detail, please look at caution for notes. *4. the upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. refer to usage, transport and storage conditions in notes. nominal coil voltage part no. pcb type tmp type 12v dc JTV1AS-PA-12V jtv1as-tmp-12v 18v dc jtv1as-pa-18v jtv1as-tmp-18v 24v dc jtv1as-pa-24v jtv1as-tmp-24v 48v dc jtv1as-pa-48v jtv1as-tmp-48v nominal coil voltage part no. pcb type tmp type 12v dc jtv1s-pa-12v jtv1s-tmp-12v 18v dc jtv1s-pa-18v jtv1s-tmp-18v 24v dc jtv1s-pa-24v jtv1s-tmp-24v 48v dc jtv1s-pa-48v jtv1s-tmp-48v nominal coil voltage pick-up voltage (at 20 c 68 f ) drop-out voltage (at 20 c 68 f ) nominal operating current [ 10%] (at 20 c 68 f ) coil resistance [ 10%] (at 20 c 68 f ) nominal operating power max. applied voltage (at 20 c 68 f ) 12v dc 75%v or less of nominal voltage (initial) 10%v or more of nominal voltage (initial) 83.3ma 144 ? 1,000mw 120%v of nominal voltage 18v dc 55.6ma 324 ? 24v dc 41.7ma 576 ? 48v dc 20.8ma 2,304 ? characteristics item speci?ations contact contact material agsno 2 type arrangement 1 form a 1 form c contact resistance (initial) max. 50 m ? (by voltage drop 6 v dc 1a) rating nominal switching capacity (resistive load) 20a 277v ac n.c.: 10a 277v ac, n.o.: 20a 277v ac max. switching power (resistive load) 8,310va (30a 277v ac) n.c.: 2,770va, n.o.: 5,540va max. switching voltage 277v ac max. switching current 30a n.c.: 10a, n.o.: 20a nominal operating power approx. 1,000mw min. switching capacity (reference value)* 1 100ma, 5v dc electrical characteristics insulation resistance (initial) min. 100m ? (at 500v dc) measurement at same location as ?reakdown voltage section. breakdown voltage (initial) between open contacts 1,200 vrms for 1 min. (detection current: 10 ma) between contact and coil 3,500 vrms for 1 min. (detection current: 10 ma) surge breakdown voltage* 2 (between contact and coil) (initial) 6,000 v operate time (at nominal voltage) (at 20 c 68 f ) max. 15 ms (excluding contact bounce time.) release time (at nominal voltage) (at 20 c 68 f ) max. 10 ms (excluding contact bounce time) (without diode) mechanical characteristics shock resistance functional min. 98 m/s 2 (half-wave pulse of sine wave: 11 ms; detection time: 10 s.) destructive min. 980 m/s 2 (half-wave pulse of sine wave: 6 ms.) vibration resistance functional 10 to 55 hz at double amplitude of 1.5 mm (detection time: 10 s.) destructive 10 to 55 hz at double amplitude of 2 mm expected life mechanical min. 1 10 7 electrical (at 20 times/min.)* 3 min. 1 10 5 (20a 277v ac at resistive load) n.o.: min. 1 10 5 (20a 277v ac at resistive load) n.c.: min. 1 10 5 (10a 277v ac at resistive load) conditions conditions for operation, transport and storage* 4 ambient temperature: ?5 c to +85 c ?7 f to +185 f , humidity: 5 to 85% r.h. (not freezing and condensing at low temperature) max. operating speed 20 times/min. (at nominal switching capacity) unit weight pcb type: approx. 25 g .88 oz tmp type: approx. 30 g 1.06 oz
panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ jt-v asctb188e 201202-t reference data 1. change of rate of pick-up and drop-out voltage (at 20 c 68 f ) sample: jtv1s-tmp-24v (6 pcs.) 2. operate/release time sample: jtv1s-tmp-24v 3. operate/release time sample: jtv1as-pa-24v drop-out voltage pick-up voltage 25 40 30 20 10 ?0 ?0 ?0 ?0 45 65 85 105 ?5 ?5 ?5 5 +77 ?7 ?1 +5 +41 +113+149+185 +221 rate of change, % ambient temperature, c f 80 90 100 110 120 0 10 20 operate/release time, ms coil applied voltage,%v max. min. max. min. operate time release time 80 90 100 110 120 0 10 20 coil applied voltage,%v max. min. max. min. operate time release time operate/release time, ms 4. distribution frequency of pick-up voltage (at 20 c 68 f ) sample: jtv1s-tmp-12v (100 pcs.) 5. distribution frequency of drop-out voltage (at 20 c 68 f ) sample: jtv1s-tmp-12v (100 pcs.) 6.-(1) coil temperature rise (tmp type)* ambient temperature: 25 c 77 f sample: jtv1as-tmp-12v (6 pcs.) 5.9 6.1 6.3 6.5 6.7 6.9 7.0 0 10 20 30 40 distribution frequency pick-up voltage, v distribution frequency drop-out voltage, v 0 10 20 30 40 2.7 2.9 3.1 3.3 3.5 3.7 3.8 temperature rise, c coil applied voltage,%v 090 100 120 140 0 20 40 60 80 20 a 10 a 6.-(2) coil temperature rise (tmp type)* ambient temperature: 85 c 185 f sample: jtv1as-tmp-12v (6 pcs.) temperature rise, c coil applied voltage,%v 090 100 120 140 0 20 40 60 80 20 a 10 a
panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ jt-v asctb188e 201202-t dimensions (mm inch ) 1. pcb type 2. tmp type for cautions f or us e . the cad data of the products with a cad data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 2-0.8 1.6 terminals 1.14 1.14 terminal 2-0.6 dia. coil terminals 20.2 0.6 26.9 0.6 3.6 0.5 31.9 0.6 1 form c 7.62 15.24 2.54 17.78 13.97 3.81 2-1.1 dia. 2-.043 dia. 3-2.1 dia. 3-.083 dia. pc board pattern (bottom view) schematic (bottom view) 0.8 1.6 terminals 1.14 1.14 terminal 2-0.6 dia. coil terminals 20.2 0.6 26.9 0.6 3.6 0.5 31.9 0.6 1 form a 15.24 2.54 17.78 13.97 3.81 2-1.1 dia. 2-.043 dia. 2-2.1 dia. 2-.083 dia. pc board pattern (bottom view) schematic (bottom view) tolerance: 0.1 .004 2-.031 .063 .045 .045 2-.024 dia. .795 .0241.059 .024 .142 .020 1.256 .024 .300 .600 .100 .700 .550 .150 .600 .100 .700 .550 .150 .031 .063 .045 .045 2-.024 dia. .795 .0241.059 .024 .142 .020 1.256 .024 cad data cad data com nc no com no nc 2-0.8 1.6 terminals 27.9 0.6 27.4 0.6 6.35 0.1 3.6 0.5 32.2 0.6 1 form c 7.62 15.24 17.78 13.97 3.81 2-1.1 dia. 2-.043 dia. pc board pattern (bottom view) schematic 0.8 0.1 0.8 0.1 2-0.6 dia. coil terminals 1.14 1.14 terminal n.c. n.o. com (top view) (bottom view) 6.20 0.5 10.93 0.5 3-2.1 dia. 3-.083 dia. 0.8 1.6 terminals 27.9 0.6 27.4 0.6 6.35 0.1 3.6 0.5 32.2 0.6 1 form a 17.78 13.97 3.81 2-1.1 dia. 2-.043 dia. pc board pattern (bottom view) schematic 0.8 0.1 2-0.6 dia. coil terminals 1.14 1.14 terminal n.o. com (top view) (bottom view) 6.20 0.5 10.93 0.5 2-2.1 dia. 2-.083 dia. 2.54 15.24 tolerance: 0.1 .004 2-.031 .063 2-.024 dia. .045 .045 1.096 .024 1.079 .024 .142 .020 1.268 .024 .031 .004 .031 .004 .250 .004 2.54 .300 .600 .700 .550 .150 .244 .020 .430 .020 .100 .031 .063 2-.024 dia. .045 .045 1.096 .024 1.079 .024 .142 .020 1.268 .024 .031 .004 .250 .004 .700 .550 .150 .244 .020 .430 .020 .100 .600 cad data cad data safety standards * csa standard: certi?d by c-ul notes 1. electrical life in order to obtain the full rated life cycles, the relay should be properly vented by removing the vent nib after the soldering/ washing process. item ul/c-ul (recognized) file no. contact rating 1 form a e43028 30a 277v ac, 30a 28v dc, 2hp 250v ac 1 form c n.o. e43028 20a 277v ac, 20a 28v dc, 2hp 250v ac n.c. e43028 10a 277v ac, 10a 28v dc, 1 / 2 hp 250v ac vent nib vent nib ncno com ?pcb type ?tmp type
|
